60340
Lay-Z-Spa® 0.5g SPA 漂浮式盐电解
产品描述
Be tough on germs in your hot tub, but gentle on your skin with the Lay-Z-Spa® Hydrogenic™ Saltwater Chlorinator. Using innovative technology, the saltwater chlorinator converts salt into a small amount of bacteria-killing chlorine to keep your hot tub crystal clear and clean, while being gentle on your eyes, hair, skin and bathing suit. Another benefit? Without the direct addition of chlorine to your spa, you'll enjoy the nearly scent-free experience of a traditional saltwater pool! Ideal for hot tubs or small pools with water capacities up to 1,400 L (369 gal.), simply add the salt to the water and the system will produce 0.5 grams of chlorine per hour for the perfect ratio of saltwater and chlorine. The rechargeable battery can run for up to 8 hours at a time, and doesn't require any cords or hoses! The chlorinator comes fully assembled and is designed to float on the surface of the water. Plus, the saltwater chlorinator also includes 50 3-in-1 test strips and 25 saltwater test strips so you can always measure the chemical and salt balances of your hot tub water to keep it clean.
Bestway百适乐®在这里为您提供一切支持!

常见问题

符合性声明

产品数据表
查阅一般的常见问题解答
安装
加了盐后,我什么时候可以使用氯化器?
Close Me
加盐后,运行过滤泵/砂滤器8小时,使盐完全溶解。在水池底搅拌盐能有效溶解。 然后按照说明书的操作说明部分启动氯化器。
技术资料
What type of salt should I use?
Close Me
Use only sodium chloride (NaCl) that is at least 99.8% pure. It is also acceptable to use water conditioning salt pellets (the compressed forms of evaporated salt), but it will take a longer time to dissolve. The purer the salt, the better the life and performance of the chlorinator. Do not use iodized or yellow (yellow prussiate of soda) colored salt. For further details, please consult your salt supplier.
IMPORTANT: The Recommended Pool Working Time Set table in the manual is based on the use of 99.8% purity of sodium chloride (NaCl). The working time may vary when using sodium chloride of lower purity.
当显示器显示00时是什么意思?
Close Me
周期结束时,显示屏显示“00”。此时,氯化器将自动进入待机模式。
氯化器指示灯熄灭后是否仍会记忆此前设定的定时工作时间?
Close Me
产品切断电源后,此前设定的定时工作时间将被重置。因此,重新启动氯化器后,您将需要设定新的定时工作时间。
如果我设置了定时过滤,氯化器会每天自动循环定时进行过滤吗?
Close Me
当氯化器完成定时过滤的工作周期后,面板将显示“00”,此时产品进入自动待机模式。
第二天大约同一时间,它将再次运行定时过滤。如果电池耗尽,电源将显示红色,氯化器将停止工作。这种情况下会定时将被重置。
如何设置氯化器的定时器?
Close Me
“(图标)有2个功能:锁/解锁和定时器设置。
-长按3秒此按钮解锁。
-快速按可调整工作时间。设置时间时,显示屏会显示设定的时间。
可以将计时器设置为1到10小时。”
我在哪里可以找到Bestway的教学视频?
Close Me
您可以在www.bestwaycorp.com的技术支持部分或Bestway YouTube上找到说明视频。
我在哪里可以找到Bestway的说明书?
Close Me
您可以在www.bestwaycorp.com的技术支持部分中找到Bestway说明书。
有哪些原因会导致我的保证书不被认可?
Close Me
法定保修不包括由于无法转让给卖方或制造商的行为、消费者不正确或不正常使用产品、或违反说明书中警告或指示的行为所造成的损害。
在测试水质后使用氯化器,为什么出现氯含量不足?
Close Me
要在水中含有必要量的氯,请按照以下说明操作:
1.氯化器使用时要盖好盖子,避免氯气蒸发。
2.增加操作时间。
3.检查电解槽,必要时进行清洁。请参阅有关如何清洁Bestway氯化器中电解槽的常见问题解答。
在哪里可以找到序列号?
Close Me
我们产品上的序列号位于不同的位置,有不同的格式。详情请参阅提供的指南。
保养
如何清洁氯化器钛板?
Close Me
为保证产品的最佳性能,请每月定期检查氯化器钛板。如有脏污,请遵循以下操作进行清洁:
- 关闭氯化器。
- 打开产品底部盖子。
- 将钛板浸入水醋混合液(50%水+50%醋)中静置3小时,或向您的水池经销商咨询合适的化学清洁剂。请务必避免使用可能损坏钛板的化学产品。
请确保只有钛板部分浸入溶液中。
- 使用清水清洗钛板。

如何使用Bestway的试纸?
Close Me
试纸测试“游离氯”、“酸碱度”和“总碱度”水平。
1. 将一根试纸条浸入水中,水面以下不超过 46 厘米(18 英寸),并立即将其取出。
2. 试纸条水平保持 15 秒,以避免反应物从一个测试区域滴到另一个区域。
注意:不要抖掉多余的水。
3. 通过将 3 个测试区域与瓶子上简单的颜色匹配图表对齐,立即比较出结果。

最近浏览
用户手册
用户手册 | 语言 |
---|